Do you constantly find yourself running into the problem of water splashing from your walk-in shower? Do you wonder what are some of the ways you can stop this from happening?
If that is the case, then you have found yourself in the right place. Although walk-in showers are great and a luxurious addition to your residence, the problem of water splashes can leave a person unsatisfied. Let us begin and talk about ways you can stop this from happening.
Table of Contents
Replacing Floor Tiles
The first and foremost thing that you need to know if you want to stop water from splashing is to take a look at your floor tiles.
If you are considering tiling your bathroom floor with smaller mosaic-style tiles, it’s crucial to make sure that they are laid out evenly and flat to avoid water gathering in the grout, which may lead to mold growth and trip hazards.
Consider a big format tile for a cleaner look and to prevent water from gathering. While some installers may claim that this is impossible with a wet room, it does not always have to be the case.
Sliding or Pivoting Glass Door
If you think replacing your floor tiles is too big of a task, then one other thing you could try is to install a glass door around the walk-in shower. This way, none of the water splashes would get out and make the entire bathroom wet.
To do so, simply measure out the area that you want the water splashes to reach and give these measurements to a home worker. If you would like to know more about shower heads, make sure to check out Virginia Shower & Bath.
Adding a Mat
Many people out there think that this is not a useful idea, but in reality, it is the opposite. With the help of a rubber or synthetic mat, you can reduce the number of water splashes from your shower head.
A great tip would be to place the rubber mat in an area where you notice the splashes reaching. When buying a rubber mat, you could have a color that matches your floor tiles, such as off-white, ash gray, or white.
Fixing the Angle of Shower-Head
You may stop the water from flying forward by selecting a “waterfall type” shower, which is one that directly points to the floor or is less angular on the wall. You may potentially enjoy the benefits of a powerful shower without worrying about water gushing all over the place by using a high-powered waterfall shower.
Moreover, with the help of a shower head that is fixed at a perfect angle, you do not have to worry about adding any sort of mats or even a pivoting glass door. While you are fixing your shower head, you can also consider purchasing a water control stopper that prevents water from flowing at a rapid rate.
The Takeaway
So there you go, folks! Now you know how you can effectively stop water splashes from your walk-in shower. Although there are many other effective methods, the ones we listed above are beneficial.
barua