Concrete Floors

How to Level Concrete Floors?

Concrete floors have become very popular these days. They allow homeowners to decorate their floors in many traditional ways. Concrete floors are also resistant to abrasion, pounding, and scouring.

But concrete floors can become uneven. Then, you cannot lay tiles or other decorative materials over them. The process of sapa semiumeda is very simple.

So, you need to know how to level concrete floors. This article will give you a complete guide to the steps.

Causes Behind Uneven Concrete Floors

Any construction work can wear off after many years. Floors are no different. The materials used in making concrete floors are very durable. But they can also get uneven after many years of use.

There can be several reasons behind the unevenness of concrete floors. The most common reason found is cracking. Floors carry heavy weights years after years. As a result, floor cracking is a natural outcome.

Another reason behind uneven concrete floors can be moisture. Too much moisture inside the concrete can cause it to crack. Thus, floors can get uneven from the cracks.

Materials Needed to Level Concrete Floors

Materials and equipment are very important for any task. You will need some specific materials to level concrete floors. Here is a complete list:

  • Self-levelling compound
  • Latex bonding agent
  • Face mask and eye protection
  • Metal scraper

When Should You Use Self-Levelling Compound??

It is quite a simple task to level concrete floors on your own. You will need a self-levelling compound for this.

But you will need to be sure whether a self-levelling compound will work or not.

The rule of using a self-levelling compound is to measure the unevenness. If the level difference is less than 5mm, you can use the self-levelling compound.

You can find two types of self-levelling compounds. Both types are powder versions of the compound, but the first one comes with a separate latex liquid.

You will have to mix them before using the compound. And the second one is the mixture of the compound and the latex liquid together.

Preparing the Room Before Levelling

Preparing the room before beginning the work is a necessity. The first thing you should do is remove all the furniture from the room. After this, use the metal scraper to remove the walls? baseboard.

Then, you can use the metal scrapper again to scrap away any debris. Then use the broom to sweep the floor. You are now ready to begin the concrete floor levelling process.

5 Easy Steps to Level Concrete Floors

We are now on the main topic. Working with the concrete floor may seem difficult. But it is relatively easy. Here are 5 easy steps to guide you through the process.

Step 1

You have already cleaned the floor of any dust and debris. You can begin this step by applying detergent to clean the floor thoroughly. After this, dry the floor to remove any oil or grease.

Now, use epoxy to fill all the cracks. You may see some very small cracks. You will also have to widen them in this step.

Step 2

Begin this step by applying latex all over the concrete. Make sure the floor is totally dry. Applying latex will help the self-levelling compound to attach correctly.

The corners and edges may be harder to reach. You can use a small paintbrush to apply latex there. After finishing the process, let the latex dry out.

Step 3

In this step, the task is to prepare the self-levelling compound. You will need to make a very smooth compound. The packaging of the compound should include all the instructions for smoothening.

It is very easy. All you have to do is add water to the compound as long as it is not smooth enough.

Step 4

It would be best if you began spreading the compound as soon as possible. The self-levelling compound can start drying out very fast.

So, you need to apply it all over the concrete floor before that. You can start pouring the compound from the opposite end of the room door.

Start from the farthest corner. And keep coming closer to the door while spreading the compound all over the floor.

Step 5

This is the final step to the process. Your work is almost done. In this step, you will need to make sure that there are no irregularities. Use a garden rake to smoothen the irregular spots.

The garden rake will give you a more extended reach. Finally, let the floor dry appropriately for a few days.

Conclusion

Knowing how to level concrete floors can be very beneficial. It can reduce the damages to your home floor. As a result, you will incur almost no expenses for repairing.

Concrete floor levelling can also improve the house structure. You can now decorate the floor and the room according to your style and taste.